Power and Voltage

240V

500W, 1000W, 1500W, 2000W

COLORS
standard: white

FINISH
epoxy-polyester powder paint

MANUFACTURING
22 gauge annealed galvanized steel case and front made of a single 20 gauge piece capable of supporting 99.8 kg (220 lbs) in the center
full-length thermal protection with automatic reset
Discreet air inlet and upward air outlet to maximize air circulation
full length grommet

ELEMENT
simple tubular stainless steel element covered with aluminum fins ensuring better heat distribution, fixed in the center and floating at the ends in nylon sleeves to reduce the expansion and contraction noises of the metal subjected to the heating cycles

CONTROL
wall thermostat (not included) – the use of an ° STELPRO electronic thermostat is strongly recommended
integrated single-pole electronic thermostat installed in the left or right junction box (optional)
low voltage relay kit and main switch (optional)

INSTALLATION
surface
connection compartment at each end
knockouts for BX type cables and cable ties that can accommodate NMD type cables located at each end, back and bottom of the unit
oblong mounting holes one inch apart (top and bottom) and 8 inch visual cues for locating studs

GUARANTEE
five years, * lifetime warranty for the heating element (for the first user)